While there is not a way to attach a tow bar to any of the front bumpers for the 2010 Jeep Wrangler Unlimited, you can add a baseplate kit that would allow a tow bar to hook up while still being compatible with your Rampage Mass Articulation Front Recovery Bumper # RA88509 (winch plate included). You will want to go with Blue Ox Base Plate Kit - Removable Arms # BX1134 as this is confirmed to fit with the Rampage bumper. Then you can add a tow bar such as Blue Ox Alpha 2 Non-Binding Tow... view full answer...
The overall diameter of your tire 275/70R 22.5 on the coach is 37.66" so the Adco Tyre Gard RV Wheel Covers - Designer Series part # 290-3960 would work well for you. You want to go by the actual diameter of the tire when it's not on the RV.
You could also use the SnapRing TireSavers Tire Covers - 36" to 39" Diameter part # ST7004BK that are a bit easier to put on the tire because you just slide the cover over the tire and let the ring snap together, they come in a quantity of 2. view full answer...
For a 4-door Jeep Wrangler, that would mean you have the Unlimited, and by retractable top I believe you are referring to the Sky One-Touch power top that is available on those models. If so, we do have one option for a roof rack that will work with a 2020 Jeep Wrangler Unlimited with the Sky One-Touch top, which is from Yakima and consists of the following parts:
- Round 58" CrossBars for Yakima Roof Rack # Y00409
- Yakima 1A Raingutter Towers # Y00101
I confirmed with the manufacturer,... view full answer...
The etrailer Motorcycle Carrier w/ Ramp for 2" Hitch # e98873 may clear the spare tire on your 2020 Jeep Wrangler Unlimited but it isn't something we've tested so you'll need to check out the following dimensions and then compare that to where the center of the hitch pin hole on your hitch receiver is relative to how far back the spare tire sits:
Distance from center of hitch pin hole to closest edge of carrier:
First hitch pin hole - 7-5/16"
Second hitch pin hole - 5-5/16"
Third hitch... view full answer...
We have the exact part you are looking for, the Aries ActionTrac running boards, with the following part number:
- Aries ActionTrac Motorized Running Boards with Custom Installation Kit - LED Lights # AA3036571
The top step on these is 70 inches long total, and has a 65 inch stepping surface. view full answer...
To flat tow your 2021 Jeep Wrangler Unlimited Sahara you'll need a tow bar, tow bar wiring kit, base plate, braking system, and safety cables. I have the following recommendations for you below:
Tow Bar: The Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights - RV Mount - 8K Item # RM-676 is a great tow bar for your vehicle. The non-binding feature will make connecting and disconnecting on uneven terrain super easy and the LED lights will make doing this in the dark no... view full answer...
We have exactly what you need to add a Rhino-Rack Pioneer Platform to your 2019 Jeep Wrangler Unlimited hardtop without the use of crossbars to keep the height low. It won't be with the legs you mentioned, but I did verify with Rhino-Rack that the following entire assembly will fit your Jeep:
- Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # JB0892
The Backbone system uses legs similar to what you mentioned so it is exactly what you were looking for, and without the added... view full answer...
The Swagman XC2 # S64650 does fit the Class II 1-1/4 trailer hitch that's on your 2021 Jeep Wrangler Unlimited. We have fit the rack onto a previous generation Jeep Wrangler and it fit as you can see in the attached picture, however depending on the size of your spare and how your hitch sits in relation to the rear bumper the rack may not clear your spare tire. The bike rack measures 10 inches from the center of the hitch pin hole to the closest wheel hoop. If you take that measurment on... view full answer...
The Rampage Replacement Jeep Tailgate Bar part # RA87135 is a fit for a 2014 Jeep Wrangler Unlimited and it will not require drilling. view full answer...
The Thule Apex # TH9027XT has similar dimensions to the Yakima Full Swing # Y02465 and will come in contact with your spare tire if you try to swing the back trunk door open. I attached a picture where we tried this bike rack with a Jeep with a spare tire and it did not clear.
The common issue with bike racks that sit far out enough to clear the spare tire is that they are still too high to clear the back door even when tilted or swung away. I have a possible solution for your but first... view full answer...
The Demco Tabless Base Plate Kit - Removable Arms Item # DM9519336 is a great option for the 2019 Jeep Wrangler unlimited. In order for the blue Ox Alladin Tow Bar Item #BX4325 to work with the Demco Base plate it will require adapters.
I recommend the Adapter for Blue Ox Tow Bars to Demco Tabless Base Plates Item # DM9523127. These will replace the adapters currently on your tow bar.
To complete your flat tow I recommend Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit Item #... view full answer...
If you have a 2021 Jeep Wrangler Unlimited with the one touch canvas roof, you can use the Rapid Gutter Feet # TH33ZR and it will clear your roof!
The knobs have dumby cores in them out of the box, but you can get these locking cores # TH450400 to get a lock on every knob. If this system for some reason does not work or you just simply do not want them anymore, our customer service team will work with you to get them returned.
I've included a video to show you how to replace the locking... view full answer...
It seems like you have the Rapid Gutter Feet # TH300R they have a place for a locking core set # TH450400. These cores will replace the plastic filler caps on each of the knobs. The Lockable knobs # TH79JV will not work with the gutter feet. I've included videos for you to watch! view full answer...
There is a roof rack that fits your 2017 Jeep Wrangler Unlimited which has the capacity to carry a pair of 46 lb kayaks, but the Rhino-Rack SG # RRSG59 has an 88 lb capacity and will not be able to handle the 91 lbs your two kayaks weigh.
Instead, I recommend a similar rack from Thule, which consists of Thule WingBar Evo Crossbars # TH711520 and Gutter Feet # TH65JV and has a 165 lb weight capacity (be sure to check out your owner's manual to ensure your Jeep's roof can handle the capacity... view full answer...
So I took a look in the owners manual, and while you'll want to verify this with your copy, the 2021 Jeep Wrangler Unlimited (the four-door) has a towing capacity of 3,500 lbs, so that would be the max you can tow with any hitch, including the Draw-Tite that fits your Jeep:
- Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR
Even though this hitch has a 4,500 lb towing capacity, you have to go by the lowest-rated component, which is the 3,500 lb capacity of your Wrangler. So you can... view full answer...
My advise is based on the assumption that your trailer with a 5-wire connector is a boat trailer and the extra wire is blue and locks out the trailer brakes when you are in reverse.
The easiest way to determine if your 2014 Jeep Wrangler Unlimited has factory tow set up is to have the dealership run the VIN for you and let you know how it was equipped. The tow package would have at least included the tow hitch and tow wiring. It seems unlikely that someone took the hitch off of your... view full answer...
Yes, you can install the Roadmaster 80" Hybrid Coiled-to-Straight Safety Cables # RM-674 through the channels of your Roadmaster tow bar. view full answer...
I do have a solution, but I would not recommend using a hitch extender with the Patriot Hitches Adjustable Drop Hitch Receiver # PH67SR. This receiver won't reduce the capacity of your hitch, but an extender will reduce the capacity by 50%. You're also going to be adding 3 parts to your hitch when you include the ball mount. Doing so will likely give you a lot of unwanted movement and a less than pleasant towing experience.
Instead, I recommend using an extended ball mount like the Hidden... view full answer...
The Curt Front Mount Trailer Hitch Receiver # 31432 has not been confirmed to fit with your Smittybilt XRC front bumper and based on your images along with others I could find it appears it would require modification to the bumper as well as the receiver to have everything fit properly. Since the Smittybilt is an upgraded bumper you may be able to weld a receiver to the bumper but be sure to discuss this with the manufacturer. We have the 2" Weld On Receiver # E17 you could use if they... view full answer...
Go To Results